22
NEW CALL Light
This light stays on steadily when you have received call information but have not yet
reviewed it.
Reviewing Call History
1To review latest calls,press c.
2To advance through the call history from an earlier call,press C.
Call history display
NOTE: If a caller left a voice message,you’ll see the MSG indicator over the right
softkey. Press the softkey to listen to the message.
Removing Call Records from History
Press Dto erase a displayed call record.
To remove all calls from history,press Cor cuntil the screen displays
End Of List,then press D. The screen prompts Remove All Calls Are you
sure?. Use the softkey to select YES.
Display Dial
NOTE: You must have a phone attached to the unit (see INSTALLATION), and you
must lift the receiver for this feature to work.
As you review calls in history,you can dial a displayed phone number. If the call
information came from your Home Area Code (the one you programmed during
Installation),the screen displays only the seven-digit number you are calling (without
an area code). When you use Display Dial,the system dials the seven displayed digits.
CALLER ID OPERATION
1760_book_1AT&T 5/1/00 7:38 PM Page 22