8
Feature Setup
You can set up one feature at a time,or you can set up a feature and then move on to set
up another feature. After you change one feature,use the softkey to select OK to move to
another feature. If you change only one feature,you can continue to select OK until the
screen exits the Feature Setup mode.
NOTE: If the unit does not receive a command within 30 seconds,it automatically
exits the Feature Setup mode.
Set the Time and Date
The system automatically resets the time and date each time new call information is
received. However,you must manually set the time and date once for the day announced
with your messages to be correct.
1Press o.
2Use the softkey to select CLOCK.
3Press Cor cto change the hour setting.
4Select NEXT to move to the minutes setting.
5Press Cor cto change the minutes setting.
6Select NEXT to move to AM or PM.
7Press Cor cto change the setting.
8Select DONE.
9Press Cor cto change the month setting.
10 Select NEXT to move to the day setting.
11 Press Cor cto change the day setting.
12 Select NEXT to move to the year setting.
13 Press Cor cto change the year setting.
14 Select DONE.
NOTE: You can select DONEto exit without changing a setting.
SET UP SYSTEM FEATURES
1760_book_1AT&T 5/1/00 7:38 PM Page 8