AT&T 1760 user manual Local Area Codes, Blocked Call Information

SET UP SYSTEM FEATURES

Local Area Codes

1Press o.

2Press Cor c.

3Use the softkey to select CALL ID.

4Select OK until the screen displays Local Area Code.

5Press Cor cto change the first digit.

6Select NEXT to move to the second digit.

7Press Cor cto change the second digit.

8Select NEXT to move to the third digit.

9Press Cor cto change the third digit.

10Select NEXT to move to the next Local Area Code, and follow Steps 5 through 10 above.

11Select OK when you have finished programming Local Area Codes.

Blocked Call Information

NOTE: This feature may be called by different names by different local telephone companies and may not be available in all areas.

You can set up the system so that when a call is received from a caller with a blocked telephone number, the system will play a pre-recorded announcement (“We’re sorry, blocked calls to this number cannot be accepted”), then hang up.

1Press o.

2Press C.

3Use the softkey to select CALL ID.

4Select OK until the screen displays Blocked Calls.

5Select CHANGE to display Accept or Do Not Accept.

6Select OK.

13