1-A Accessories 1-B Location of Controls
Handset Base unit
Handset Hook (6-C)
Indicator (1-C, 5-A)
(TALK) Button and
Button (5-B, 5-F)
(1-C, 3-A, 4-A, 5-F)
(LOUD) Button (2-A)
(1-C, 3-A, 5-F)
•USE ONLY WITH Panasonic AC ADAPTOR PQLV16AL.
•The AC adaptor must remain connected at all times.
(It is normal for the adaptor to feel warm during use.)
•This unit will not function during a power failure. If you want to
connect a standard telephone on the same line;
KX-TC2000AL: Use a telephone double adaptor.
KX-TC2000NZ: Use a T-adaptor.
•KX-TC2000AL and KX-TC2000NZ are not designed to be used
with rotary (pulse dialling) services.
Install the battery in the handset, and close the
handset cover, locking it into place.
To replace the battery:
Press the notch on the cover firmly and
slide it as indicated by the arrow.
Replace the old battery with new one
(6-A). Close the cover and charge for
about 15 hours.
•Be sure wires are free from being pressed by the battery body
or the handset cover.
Charge the battery for about 15 hours.
•See section 6-A for more details.
•The IN USE/CHARGE indicator lights.
IN USE/CHARGE Indicator
Fasten the AC adaptor cord.
To Power Outlet
(AC 230 V–240 V,
For New Zealand
Telephone Line Cord
Connect as shown.
Getting Started Section 1
Telephone Line Cord............................one
For Australia For New Zealand
For Australia only