Panasonic KX-TCD400NZ operating instructions Base Unit Settings, Base Unit PIN *1

Base Unit Settings

Before programming, please follow steps 1 to 2.

1 2 "INPUT CODE"

Press MENU. Search/Select

"SETTING BS".

Changing Base Unit PIN

The factory preset is 0000. Once you have programmed the base unit PIN, you cannot confirm it. We recommend you write down the base unit PIN. If you forget it, please consult your nearest Panasonic Service Centre.

3 5 4 Current 4-digit Base Unit PIN 5 New 4-digit Base Unit PIN

6 New 4-digit Base Unit PIN again to verify

Selecting the Flash Timing

You can select the flash timing, 100 msec (milliseconds), or 600 msec depending on your PBX requirements.

3	3 4	4-digit	5 2	6 1	7	1	100mse	8
		Base Unit				OR
		PIN*1				2	600ms	Press OK.

•To exit the operation, press any time.

*1 The factory preset is 0000.

22