Before Requesting Help

If you experience any problems with the normal use of your apparatus, you should unplug it from the telephone outlet and connect a known working telephone in its place. If the known working telephone still has problems, then please contact the customer service department of your Network provider.

If it operates correctly, then the problem is likely to be a fault in your apparatus.

In this case, contact your supplier for advice. Your Network provider may charge you if they attend a service call that is not due to apparatus supplied by them.

Turn the power OFF then ON (Handset) / Disconnect then connect the AC adaptor (Base unit).

Problem

Possible cause

Solution

 

 

 

NO LCD display in handset.

Handset not turned on.

Turn on power (p.9).

 

 

 

Handset will not turn on.

Batteries not inserted.

Insert the 2 rechargeable

 

 

batteries supplied (p.4).

 

Batteries not charged.

Place handset in base and

 

 

connect AC adaptor to base

 

 

and AC outlet (full charge

 

 

period 7 hrs).

Batteries charge icon not

Dirty charge contact.

counting up.

Base not powered up.

 

Clean charge / battery contact and retry charge.

Connect AC adaptor to base unit and AC outlet.

icon flashes.

Handset out of range of base.

No power into base unit.

Move handset closer to base.

Connect AC adaptor to base unit and AC outlet.

Handset busy tone heard

Handset out of range of

when

is pressed.

base.

Move handset closer to base.

No dial tone.

Telephone line not

Insert telephone cord to

 

 

 

connected.

network.

 

 

 

 

Turn power OFF then ON.

 

 

 

 

 

Cannot dial out.

Call BAR set.

Turn feature off.

 

 

 

Key lock mode ON.

Turn key lock OFF.

 

 

 

 

 

Handset will not ring.

Ringer switched off.

Set ringer to one of 6

 

 

 

 

volume levels.

 

 

 

 

(see "Handset Settings".)

 

 

 

 

Last number redial does not

Number exceeded 24 digits. Redial manually.

work.

 

 

 

 

 

 

 

 

 

icon flashes.

Battery low.

Recharge batteries.

 

 

 

 

 

 

 

 

 

 

icon is disappeared.

Wrong battery type selected. Set the correct battery type.

 

 

 

 

26

Page 26
Image 26
Panasonic KX-TCD400NZ operating instructions Before Requesting Help, Problem Possible cause Solution