Panasonic KX-TCD420AL operating instructions Multi-unit User Operation

Multi-unit User Operation

: Handset Registration to a Base Unit

Handset Registration

The handset supplied with the base unit is already registered. If an optional handset is purchased, it must be registered. Additional KX-A142ALhandsets are available to purchase separately. Up to 6 handsets can be registered to a single base unit. Using additional handsets allows you to have an intercom call while simultaneously conducting a call to an outside line.

Handset must be registered within 1 minute after pressing PAGE button. If over

1 minute, press then start over again.

Charge the optional handset batteries for 7 hours before initial use.

1		2		3	"REGISTER HS"
	Press MENU.		Search/Select		Search/Select
			"SETTING HS". "REGISTRATION".
4		5 Press and hold			on the Base Unit
	Press	(for about 5 seconds) until the green indicator flashes.
		If all registered handsets start ringing (Paging),
	RIGHT.*1
		press		to stop paging then start over again.

Cordless Telephone

6		7 4-digit Base	8
	Search/Select desired	Unit PIN after	Press OK.

base unit number	"BS PIN" is
	displayed.
available to register
	Factory preset 0000
the handset.

When a handset is registered successfully, a confirmation tone sounds and icon lights.

•To exit the operation, press any time.

*1 If a handset has been already registered to 4 base units, "MEMORY FULL" is displayed.

31