30

Base Unit Settings

Changing Base Unit PIN
The factory preset is 0000. Once you have programmed the base unit PIN, you
cannot confirm it. We recommend you write down the base unit PIN. If you forget
it, please consult your nearest Panasonic Service Centre.
Call Restriction
You can restrict selected handset(s) from dialling selected phone numbers. You can
assign up to 10 call restriction numbers (up to 8 digits). If you dial a restricted number,
the call does not connect and the restricted number flashes.
Cancelling Call Restricted Handset(s)
To exit the operation, press any time.
*1The factory preset is 0000.
*2The selected handset number flashes.
*3The selected handset(s) will stop flashing.
Before programming, please follow steps 1 to 2.
Press MENU. Search/Select
"Setting Base".
"Input Command"
12

Current 4-digit Base Unit PIN New 4-digit Base Unit PIN

New 4-digit Base Unit PIN again to verify

5
3
6
45

4-digit Base Unit PIN

*1
Select desired handset.*2
Handset Number
Phone Number
Press OFF.
To continue entering call
restriction numbers, repeat
steps 7 and 8.
(up to 10 numbers)
OR
Press RIGHT.
6
3
789456
Enter phone
number to be
restricted.
(up to 8 digits)
Press RIGHT.

4-digit Base

Unit PIN

*1 Select desired handset.*3
Handset Number
6
34 5 67
Press OFF.
Press RIGHT.
450NZ_e.book Page 30 Monday, May 12, 2003 4:20 PM