28
Handset Settings
Setting the Direct Call Number
After a direct call number has been set and the feature has been turned on, you can dial
the direct call number only by pressing TALK or SPEAKERPHONE. Incoming calls are
accepted.
Setting the Direct Call On/Off
•To exit the operation, press any time.
*1If "ON" is selected, "" is displayed.

Other Options

Changing Handset PIN
The factory preset is 0000. Once you have programmed the handset PIN, you
cannot confirm it. We recommend you write down the handset PIN. If you forget
it, please consult your nearest Panasonic Service Centre.
•To exit the operation, press any time.
Before programming, please follow steps 1 to 3.
Press MENU. Search/Select
"Call Option".
Search/Select
"Setting Handset".
12 3
Search/Select
"Direct Call No.".
Phone Number
Enter the direct
call number. (max. 24 digits) Press OK 3 times.*1
45 6
Search/Select
"Direct ON/OFF".
Search/Select
"ON" or "OFF".*1
45

Current 4-digit Handset PIN

Search/Select
"Change Hset PIN".

New 4-digit Handset PIN New 4-digit Handset PIN again to verify

4
67
5
Press MENU. Search/Select
"Other Option".
Search/Select
"Setting Handset".
12 3
450NZ_e.book Page 28 Monday, May 12, 2003 4:20 PM