Sharp FO-4400 operation manual 109, Setting 27 Department Code Digits, Setting 28 Distinctive Ring

Optional Settings

Note: If you select AFTER for the BILLING CODE DIAL selection, you must press

REDIAL	SPEAKER
after dialing if you use	.

Setting 27: DEPARTMENT CODE DIGITS

Use this setting if you are using Telephone Billing and need to change the number of digits of Department Codes to accord with your PBX’s telephone

billing system. Enter any number from 3 to 9 .

♦Initial setting: 4

Setting 28: DISTINCTIVE RING

This sets the ring pattern to which your fax will answer if you subscribe to a

distinctive ring service. Enter a number from 1 to 5 ( 1 to 7 in Canada) to select a pattern. See page 100 for more details.

♦Initial setting: 5

Setting 29: VERIFICATION STAMP

Press 1 if you want the fax machine to stamp each original document page as it is scanned. After scanning, you can check to see if all pages have been stamped to verify that no double feeds occurred. Press 2 to turn the function off.

Note: To use this function, your dealer must install the Verification Stamp option.

♦Initial setting: 2

Setting 30: COPY RESOLUTION

Use this setting to select the default copying resolution (the resolution used for

copying if a setting is not made with RESOLUTION ). Press 1 for STANDARD,

2for FINE, or 3 for SUPER-FINE.

♦Initial setting: 2

6. Optional Settings

109