Sharp FO-4400 Turning Polling Security on and off, Press Menu , 3 , 0, Press To set a number

Polling

Polling Security

Polling Security allows you to prevent unauthorized polling of your fax. When this function is activated, polling will only take place when one of the following conditions is met:

♦The fax number of the polling fax machine has been stored in your fax’s list of permitted fax numbers (called "passcode numbers"). The polling fax must also have its fax number programmed in itself, as explained in Entering Your Name and Fax Number in Chapter 1.

♦A System number has been programmed in the polling fax machine which matches your fax’s System number or one of your ID numbers.

♦An ID number has been programmed in the polling fax machine which matches your fax’s System number.

System and ID numbers are 4-digit numbers which provide you with an alternate means of giving and receiving polling permission when you don’t want to use fax numbers. The steps for programming these numbers are described in the following pages.

Note: System and ID numbers can only be used if the other fax machine is also a Sharp machine.

Turning Polling Security on and off

Polling Security is turned on or off with Option Setting 8 as explained on page 104.

Storing and clearing fax numbers for polling permission

You can store up to 10 fax numbers in your fax’s list of permitted numbers.

1 Press

MENU , 3 , 0 , 2 .

Display:

02:PASSCODE # MODE 1=SET, 2=CLEAR

2 Press	1	to set a number.
(Press	2	to clear a number.)

1:PASSCODE SETTING ENTER # (01-10)

74