Optional Settings

Setting 31: SEPARATE MODE

If desired, you can have the fax draw a sheet of paper from one of the paper sources after each fax reception. By loading colored (or large) paper in that source, each colored sheet drawn will act as a separator that makes it easy to distinguish where one multi-page document ends and another begins. A Transaction Report printed after a reception will also be printed from that

paper source to act as a separator sheet. To turn on this function, press

1

and then select the paper source for the separator paper by pressing 1

for

the paper tray or 2 for the paper cassette. After turning on the function, be sure to load appropriate paper in the selected paper source. To turn off Seperate mode, press 2 . (Note that the function will turn off automatically if

the selected paper source runs out of paper.)

Note: This setting is only available if your dealer has installed the paper cassette option.

Initial setting: 2

Note: If you turn off the Separate Mode setting, Option Setting 16 will subsequently appear in the display to allow you make an appropriate setting for cassette selection. If you don’t make a selection, 1:AUTO SELECTION will be automatically selected.

110

Page 112
Image 112
Sharp FO-4400 operation manual 110, Setting 31 Separate Mode