Sharp FO-4400 operation manual Setting the Date and Time

Setting the Date and Time

Setting the Date and Time

The date and time appear in the display, in reports, and at the top of each page you transmit. Set the date and time by pressing the keys on the operation panel as shown below.

1 Press MENU

and 3 .

Display:

3:ENTRY MODE ENTER #(01-10, , )

2 Press 0 and 4 .

04:DATE&TIME SET DATE 06-08-2003

(The currently set date will appear to the right of “DATE”)

3 Enter a two-digit number for the month (“01” for January, “02” for February, “12” for December, etc.).

Example: March 0 3

•To correct a mistake, press to move the cursor back to the mistake and then enter the correct number.

4 Enter a two-digit number for the day (“01” to “31”).

Example: The 5th 0 5

5 Enter the year (four digits).

Example: 2003 2 0 0 3

6 Enter a two-digit number for the hour (“01” to “12”) and a two-digit number for the minute (“00” to “59”).

Example: 9:25 0 9 2 5

26