Sharp FO-4400 operation manual Entering and Using Programs, Programmed

Entering and Using Programs

Entering and Using Programs

If you frequently perform the same operation involving the same party, you can program all the steps of the operation into one Program Key. This allows you to perform the operation by simply pressing that key.

♦Any Rapid Key which is not already programmed as a Rapid Key or a Group Key can be used as a Program Key.

♦You can include a timer setting in the program to have the operation performed automatically at a selected time.

♦To clear a mistake in the procedures that follow, press .STOP

Initial procedure

To program a Program Key, first perform the following procedure. After you have completed this procedure, go to the procedure for the specific operation you want to program (see the following pages).

1	Press	MENU , 5 and	1 .	Display:
				1:PROGRAM ENTRY MODE
				1=SET, 2=CLEAR
2	Press	1 to select SET.		1:PROGRAM SET
				PRESS PROGRAM KEY

3 Select a Program Key by pressing any	Q / !	W / "	E /	#	R /	$	T /	% Y /	&	U / '	I / (	O /	)	P	/ =
	01	02	03		04		05	06		07	08	09		10
Rapid Key that has not yet been	11	12	13		14		15	16		17	18	19		20
	SYMBOL	A /	S		D		F	G /	{	H / }	J / [	K /	]	L	/ +
programmed.	21	22	23		24		25	26		27	28	29		30
	31	32	33		34		V	35		36	37	38		39
	Caps Lock Z / <		X / >		C			B		N / *	M / ?	@		.com
	SHIFT	/ ^	/ /	\	; /	:		Space		_	-	. /	,	DEL

4 Enter a name for the program by pressing the letter entry keys (see Step

5 on page 25). (Maximum of 20 characters.)

If you don’t want to enter a name, go directly to Step 5.

5 START/

Press ENTER .

5. Special Functions

85