Panasonic KX-TCD650E Additional Features, Key Lock Dialling Pause, Recall Feature, Call Waiting

650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 9

Key Lock Dialling Pause

You can lock the handset dialling buttons. Only incoming calls are accepted while the key lock is ON.

Turn Key Lock ON

Z and hold Y until a beep sounds.

‘Ó’ is displayed and all dialling buttons are locked.

!When the key lock is ON, emergency calls cannot be made until key lock is cancelled.

Turn Key Lock OFF

Z and hold Y until a beep sounds.

‘Ó’ disappears and key lock is cancelled.

The key lock is also cancelled if the handset is turned off.

Recall Feature

M is used to access special telephone services. Contact your Network provider for details.

If your unit is connected to a PBX, pressing M allows you to access some features of your host PBX such as transferring an extension call (Refer to ‘TBR’ in ‘Base Unit Settings’).

Call Waiting

Call Waiting is a service of your Network provider and will only operate if you have subscribed to this service.

After subscription, your handset displays a second caller’s phone number while talking and a Call Waiting tone is heard.

You can answer the second call, keeping the first call on hold.

Please consult your Network provider for details of this service.

!This function is for PBX line/long distance service users.

A dialling pause is used when a pause in the dialling of the phone number is necessary using a PBX or accessing a long distance service. (see “Select Pause Timing”).

For example, when 9 (line access number) is dialled followed by a pause to access an outside line through a PBX:

ZI.

ZX. (‘p’ is displayed on the LCD).

Enter telephone number. Z‰.

Entering a pause prevents misdialling when you redial or dial a stored number.

Pressing X once creates one pause. To extend the pause requirement time, ZX accordingly.

Additional Features

Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 9