650e eng Baseline TXT 23 4 02 23/4/02 12:25 pm Page 14
Before programming, please follow steps 1 to 3 of ‘Base Unit Settings’.
Base Unit Settings
Select Pause Timing
You can set the pause timing to 3 or 5 seconds, depending on your PBX requirements (see “Dialling Pause”).
ZC.
Enter PIN.
ZC.
ZA to select 3 seconds
OR
ZB to select 5 seconds.
ZV.
Set the 4 - Digit Base Unit PIN
You can change the
ZE.
Enter PIN.
Enter New PIN (4 digits) twice.
If entered incorrectly, an error tone sounds.
If entered correctly, a confirmation tone sounds.
!Once you have programmed the password, you cannot con- firm it. We recommend you write down the password. If you forget it, please consult our Panasonic Customer Care Helpline.
U.K. 08700 100 076 R.O.I. 01289 8333
Set Call Restriction
You can restrict selected handset(s) from dialling selected phone numbers. You can assign up to 6 call restriction numbers (up to 8 digits). ZF.
Enter PIN.
All registered handset numbers are displayed.
ZA - F to select handset(s) to restrict.
The selected handset(s) will flash. ZV.
Enter a restriction number (max. 8 digits).
(If you misdial ZW).
ZY to confirm restriction number.
To continue entering call restriction numbers (max. 8 digits), enter the number, then ZY.
On completion, ZY.
!If you dial a restricted number, the call does not connect and restricted number flashes.
Cancel Call Restricted Handset(s)
ZF.
Enter PIN.
ZA - F to select handset(s) to cancel.
The selected handset(s) will stop flashing.
ZV.
14 | Helpline Tel.No. : U.K. 08700 100 076 R.O.I. 01289 8333 |
