Panasonic KX-TD816CE Basic Operations, Making Calls, Intercom Calls, Enter the extension number

Basic Operations

Making Calls

Intercom Calls

Make sure the Power Switch is set to ON (●) and “ ” is displayed.

1

2

INT'

Press (Talk) or (Intercom).

Enter the extension number.

•	The dialed number is displayed.		201
•	If you misdial, press	(Flash) and

enter the number again.

3 Talk after the called party answers.

201

4 Press C (Cancel) after the conversa-

tion is finished.

Note: – Predialing is also possible. In this case, reverse steps 1 and 2.

– If you misdial while predialing, press CLR (Clear) to clear each digit from the last one, and enter the number again.

–You can also finish the conversation by placing the PS on the Charger

or pressing (Talk).

–If “ ” flashes, move towards the Cell Station and try again.

Handover: Even if you move during a conversation, the linking CS is automatically switched without disconnecting the call.

Handover is available only during a conversation (except a conference call). It is not available when the switched CS is busy or there is no CS in the moving range.

13