Panasonic KX-TD1232CE, KX-TD816CE user manual Before Requesting Help, Redial

Before Requesting Help

	PROBLEM	REMEDY OR SOURCE OF TROUBLE
The PS does not work.		• The battery is empty. Charge the batteries fully (p. 9).
		• The PS has been canceled or the PS has not been reg-
		istered. To register the PS, refer to system program
		[650], “PS Registration”, in the Installation Manual
		Addendum for the KX-TD144/KX-TD142/KX-
		TD7500.
The PS does not operate.		• The power switch is OFF (❍). Turn it ON (●).
The PS does not ring.		• Ringer volume is set to OFF or VIBRATION.
		• The PS is out of range or the Cell Station (CS) is
		busy.
		• The radio channel is busy or radio communication
		error occurs. Try again later.
You cannot dial.		• The number which you dialed is restricted by the sys-
		tem.
		• The key lock mode is set. To cancel the mode, see
		page 19.
		• The radio channel is busy or radio communication
		error occurs. Try again later.
Static, sound cuts in/out, fades.		• Set the PS and CS away from other electrical appli-
Interference from other electrical units.		ances.
		• Move closer to the CS.
“ CS Busy” is displayed.		• The Cell Station is busy. Try again later.
“ PS NO CONNECTED” is displayed.		• The power switch is set to OFF.
		• The PS is out of range.
		• The radio channel is busy or radio communication
		error occurs. Try again later.
You cannot store a phone number and		• Your entry exceeds the maximum digits or characters.
name in the directory.		• Do not pause for over 30 seconds while programming.
The alarm sounds after pressing		• No number is saved in the Call Log.
(Redial).
“	” flashes or beeps tones sound	• The battery is low. Charge the batteries fully (p. 9).
every 5 seconds during a conversation.

54