Before Initial Use
Charger Wall Mounting
1.Install the two included screws in the wall, spacing them 24.5 mm (1 in) apart.
for charger | 24.5 mm (1 in) |
24.5 mm 
(1 in)
Washer
Screws
Drive the screw
to this point.
2.Mount the charger securely on the wall.
•Make sure that the wall that the charger will be attached to is strong enough to sup- port the weight of the handset and charger (240 g [0.53 lb]). If not, it is necessary for the wall to be reinforced.
•When this product is no longer in use, make sure to detach it from the wall.
Attaching the Belt Clip
You can attach the handset to your belt by following the steps below.
[To attach] | [To remove] |
Allows phone straps and sim- ilar objects to be connected.
Insert the clip into the designated notches in the | Remove the belt clip. |
handset. |
|
6 | Document Version |
