Panasonic KX-TD7896 manual Main Item Description Setting Default

Setting the Handset and Base Unit

	Main Item	Description		Setting	Default
		Selects the type of PBX that		Type 1*2
	PBX Type				Type 1
		the base unit is connected to.*1		Type 2
		When using a KX-TAW848/KX-		Mode 1
	Fwd/DND Icon
		TDA series PBX, and the PT		Mode 2
		LED patterns for FWD and
					Mode 1
		DND have been set reversely
		on the PBX, you need to set
		Mode 2. (See page 7.)
		For Private Ring, select the		1st Line
	Caller ID Line
		displayed phone number or		2nd Line
“PBX Type-Type 1
		name line. It is recommended
				3rd Line
(KX-TAW/TDA series)”
		to select the phone number
only		line. Displayed items vary
		depending on your PBX and its			1st Line
		settings.
		<Example>
		1st Line	T.Edison
		2nd Line	01234567890
		3rd Line	LN-001:
		Sets the current date and time		Date
	Date&Time
		to be shown on the display in		Time
					01-01-05 (D-M-Y)
“PBX Type-Type 2
		the Incoming Call Log.
					12:00 AM (H:M)
(KX-TA308/TD
series)” only
		Sets each type of Incoming		Single Tone
	Incoming Log
		Call Log to either on or off.*3		On
“PBX Type-Type 2
		You must set at least one of the		Off
(KX-TA308/TD
		incoming call types to on to		Double Tone	Single Tone: Off
series)” only
		store a received call in the		On	Double Tone: Off
		Incoming Call Log.		Off	Triple Tone: Off
				Triple Tone
				On
				Off

*1 After you set the PBX type, unplug the AC adaptor, wait until the run indicator of the base unit turns off, and plug in the AC adaptor again.

*2 To check the type of PBX you are using, see page 31.

*3 When a check mark is displayed beside a tone type, the incoming call log for that tone type will be logged.

• These settings are only applied to your telephone, not the PBX itself.

35