Multi-unit Operation

Answering transferred calls Press {C} to answer the page.

LAfter the paging party disconnects,

you can talk to the outside caller.

Registering a handset

The included handset and base unit are preregistered. If for some reason the handset is not registered to the base unit, register the handset.

1Handset: {MENU}

2{V}/{^}: “Handset settingsi

{OK}

3{V}/{^}: “Registrationi{OK}

4{V}/{^}: “HS registrationi

{OK}

5Base unit:

Press and hold {LOCATOR} until the registration tone sounds.

LIf all registered handsets start ringing, press {LOCATOR} to stop, then repeat this step.

LAfter the base unit beeps, the rest of the procedure must be completed within 1 minute and 30 seconds.

6Handset:

Press {OK}, then wait until a beep sounds and w stops flashing.

Registering an additional handset See page 3 for information on the available model.

Start from step 5.

Deregistering a handset

1{MENU}

2{V}/{^}: “Handset settingsi

{OK}

3{V}/{^}: “Registrationi{OK}

4{V}/{^}: “Deregistrationi

{OK}

5{3}{3}{5} i{OK}

6Select the handset(s) you want to cancel by pressing the desired handset number ({1} – {6}). i

{OK}

LThe selected handset number(s) flashes.

LTo cancel a selected handset number, press the number again. The number stops flashing.

7{V}/{^}: “Yesi{OK}

8After “Deregistered“ is displayed, press {OFF}.

For assistance, please visit http://www.panasonic.com/help

35

Page 35
Image 35
Panasonic KX-TG1033 Registering a handset, Deregistering a handset, Answering transferred calls Press C to answer, Handset