Programming
*5 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
*6 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at “700ms” unless pressing {FLASH} fails to pick up the call waiting call.
Alarm
An alarm will sound once for 3 minutes at the set time. Set the date and time beforehand (page 15).
1{MENU}
2{V}/{^}: “Alarm” iPress {OK} 2 times.
3{V}/{^}: Select the desired alarm mode. i{OK}
Off | Turns alarm off. Press {OK} again, then press {OFF} to exit. |
|
|
Once | The alarm sounds once at the set time. Enter the desired date. |
|
|
Daily | An alarm sounds daily at the set time. |
|
|
4Set the desired time. i{OK}
5{V}/{^}: Select the desired ringer tone. i{OK}
L We recommend selecting a different ringer tone from outside call.
6{V}/{^}: “Save” i{OK} i{OFF}
Note:
LTo stop the alarm, press any dial key or place the handset on the base unit or charger.
LWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
LIf you select “Once“, the setting will change to “Off“ after the alarm sounds.
LWhen the ringer volume is set to off, the handset rings at the low level for alarm.
Customer support
The handset can display the Internet address where you can download the operating instructions or get further information for this product using your computer.
1{MENU}
2{V}/{^}: “Customer support” i{OK} i{OFF}
For assistance, please visit http://www.panasonic.com/help | 25 |
