Panasonic KX-TG1034 Remote operation, Operating the answering, System, Using the answering system

		Answering System
		*2 You can also erase as follows:
Operating the answering
		{CLEAR} i{V}/{^}: “Yes” i
system		{OK}
You can also operate the answering
system by pressing dial keys on the
		Remote operation
handset. To use the following
commands:		Using a touch tone phone, you can call
1 {MENU}
2 {V}/{^}: “Answering device”		your phone number from outside and
i{OK}		access the unit to listen to messages.
		The unit’s voice guidance prompts you
Key	Operation	to press certain dial keys to perform
{^} or {V}	Adjust the receiver/	different operations.
	speaker volume	Important:
	(during playback)	LIn order to operate the answering
{1} or {<}	Repeat message	system remotely, you must first set a
	(during playback)*1	remote code (page 31). This code
		must be entered each time you
{2} or {>}	Skip message
		operate the answering system
	(during playback)
		remotely.
{3}	Enter the “Settings“
	menu	Using the answering system
{4}	Play new messages	remotely
{5}	Play all messages	1 Dial your phone number from a touch
{6}	Play greeting message	tone phone.
		2 After the greeting message starts,
{7}{6}	Record greeting
	message	enter your remote code (page 31).
		LThe unit announces the number of
{8}	Turn answering system
		new messages.
	on
		LThe voice guidance informs you of
{9}	Stop (recording,	the available commands. The
	playback)	announcements are different
		depending on the voice guidance
{0}	Turn answering system
		language settings (page 14).
	off
		3 Control the unit using remote
{*}{4}*2	Erase message
		commands (page 30).
	currently playing
		4 When finished, hang up.
{*}{5}	Erase all messages
{*}{6}	Erase greeting
	message
*1 If pressed within the first 5 seconds
of a message, the previous
message is played.
For assistance, please visit http://www.panasonic.com/help			29