Useful Information
5Connect the telephone line cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use round cut out at the bottom of the adaptor if you are using the 4 inches phone plate), then sliding the unit down to secure it.
Connect the AC adaptor to power outlet (page 9).
LThere are two common types of wall phone plates. The distance between 1 and 2 may vary depending on the size of the wall phone plate installed.
| 1 |
| 83 mm |
| (31/4 inches) |
| or |
| 102 mm |
| (4 inches) |
| 2 |
| (120 V AC, |
| 60 Hz) |
83 mm | 102 mm |
(31/4 inches) | 1 (4 inches) |
| 2 |
To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B).
A A 
B
Belt clip
You can hang the handset on your belt or pocket using the included belt clip.
To attach the belt clip
To remove the belt clip
While pressing the top of the clip(A), pull the right edge in the direction of the arrow (B).
A
B
For assistance, please visit http://www.panasonic.com/help | 37 |
