Useful Information
21
LIf you forget your PIN, see page 21.
LWhen the handset has been registered successfully, w stops
flashing.
LIf w is still flashing, start again from step 1.
Changing the handset PIN
1{j/OK}
2{v}/{e}: “SETTING HS” i {>}
3{v}/{e}: “OTHER OPT” i {>}
4{v}/{e}: “HSPIN CHANGE” i {>}
5{*}{7}{0}{0}{0}
6Enter the new 4-digit handset PIN.
7Enter the new 4-digit handset PIN again.
8{ih}
Changing the base unit PIN
1{j/OK}
2{v}/{e}: “SETTING BS” i {>}
3{5}
4{*}{7}{0}{0}{0}
5Enter the new 4-digit base unit PIN.
6Enter the new 4-digit base unit PIN again.
7{ih}
Specifications■ Standard:
DECT (Digital Enhanced Cordless Telecommunications)
■ Number of channels:120 Duplex Chan nels
■ Frequency range:1.88 GHz to 1.90 GHz
■ Duplex procedure:
TDMA (Time Division Multiple Access)
■ Channel spacing:1,728 kHz
■ Bit rate:1,152 kbit/s
■ Modulation:
GFSK (Gaussian Frequency Shift Keying)
■ RF transmission power:
Approx. 10 mW (average power per channel)
■ Voice coding:ADPCM 32 kbit/s
■ Power source:
220–240 V AC, 50/60 Hz
■ Power consumption:
Base unit:
Standby: Approx. 2.1 W
Maximum: Approx. 5.7 W
Charger*1:
Standby: Approx. 1.1 W
Maximum: Approx. 5.2 W
■ Operating conditions:
5 °C–40 °C, 20 %–80 % relative air humidity (dry)
■ Dimensions:
Base unit:Approx. 103 mm × 104 mm × 58 mm
Handset:Approx. 148 mm × 50 mm × 33 mm
Charger:Approx. 87 mm × 75 mm × 53 mm
TG1311_1312_1313BX(e).book Page 21 Tuesday, September 2, 2008 10:36 AM