60
Problem
You cannot page the
handset or the base unit.
You cannot redial by
pressing (PAUSE/REDIAL)
on the handset.
“Recharge” is displayed,
“”flashes or the
handset beeps
intermittently.
“Charge for 15h” is
displayed and the handset
does not work.
You charged the battery
fully, but “Recharge” is still
displayed and/or “”
continues to flash, or
“Charge for 15h” is
displayed.
The CHARGE indicator
light does not go out after
the battery has been
charged.
You cannot have a
conversation using the
headset.
Cause & Remedy
•The called handset is too far from the base
unit.
•The called unit is in use. Try again later.
•If more than one other user is using the
handsets and base unit, you may not be able
to page. Try again later.
•While 2 other handsets are making a
conference call, you cannot page the handset
or the base unit. Try again later.
•If the last number dialed was more than
32 digits long, the number will not be redialed
correctly.
•The button has a double function as either
redial or pause. It will redial the last number
dialed if pressed at the outset of a call
(p. 22). If another number has been dialed
first, it will operate as a pause button (p. 47).
•Charge the battery fully (p. 9, 10).
•The battery has been discharged. Charge the
battery fully (p. 9, 10).
•Clean the charge contacts and charge again
(p. 10).
•Install a new battery (p. 53).
•This is normal.
•Make sure that an optional headset is
connected properly (p. 11).
•If “SP-phone” is displayed on the handset,
press to switch to the headset.
Troubleshooting