Installation

Battery strength

You can check the battery strength on the handset display. The battery strength is as shown in the chart below.

Display prompt

Battery strength

Fully charged

Medium

Low

(flashing)

Needs to be recharged.

Recharge

Recharge the battery when:

—“Recharge is displayed on the handset,

—“ ” flashes on the display, or

—the handset beeps intermittently while it is in use.

Recharge

If you DO NOT recharge the handset battery for more than 15 minutes, the

display will continually indicate “Recharge” and/or will flash when the handset is lifted off the base unit or the charger.

If the battery has been discharged, the handset will display “Charge for 15h” when you place the handset on the base unit or the charger. The handset will not work. Keep charging until fully charged.

Battery information

After your Panasonic battery is fully charged (p. 9):

Operation

Operating time

 

 

While in use (TALK)

Up to 4 hours

 

 

While not in use (Standby)

Up to 7 days

 

 

The battery operating time may be shortened depending on usage conditions and ambient temperature.

Clean the charge contacts of the handset, the base unit and the charger with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or high humidity. Otherwise the battery may not charge properly.

If the battery is fully charged, you do not have to place the handset on the base

unit or the charger until “Recharge” is displayed and/or “ ” flashes. This will maximize the battery life.

The battery cannot be overcharged.

10

Page 10
Image 10
Panasonic KX-TG2352W Recharge, Battery information, Display prompt Battery strength, Operation Operating time