Panasonic KX-TG2356 LCD Contrast Handset, Setting the base unit ringer tone by using the Handset

Programmable Settings

Base unit ringer tone

(use either the handset or the base unit) Base Unit

Make sure the base unit is not being used.

Press VOLUME [<] or [>], then select the desired ringer tone by pressing

[1]to [7].

[1] to [3] : Bell ringer patterns [4] to [7] : Melody patterns

•After pressing VOLUME [<] or [>], the base unit will ring using the current ringer tone.

•The base unit will ring and the ringer tone will change.

•To stop ringing, press [STOP].

Setting the base unit ringer tone by using the Handset

1Press [MENU].

2Scroll to “Initial setting” by pressing [d] or [B], then press

Select.

3Scroll to “Set base unit” by pressing [d] or [B], then press Select.

4Press Select at “Ringer tone”.

5Follow steps 4 and 5 of “Handset ringer tone” on page 18.

•When selecting the ringer tone, the base unit will ring. If the base unit ringer volume has been turned off, the base unit will not ring (p. 18).

LCD Contrast Handset

There are 6 levels of LCD contrast. The factory preset is “level 3”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.
		KBack dB SelectL
3	Scroll to “LCD contrast” by pressing [d] or
		LCD contrast
	[B], then press Select.
		KBack dB SelectL
4	Select the desired contrast by pressing [d] or	Ex. Level 3
	[B].	LCD contrast
	• The contrast will change.	Low	High
		KBack dB	SaveL

5Press Save, then press [OFF].

Preparation

For assistance, please call: 1-800-211-PANA(7262)

19