Panasonic KX-TG2356 operating instructions Using the Pause Key, Selecting the flash time Handset

9P15551234567Kf d=Next PL

		Special Features
Using the PAUSE Key
(For PBX Line/Long Distance Calls)		Handset
We recommend you press Pause or P if a pause is			Example
required for dial with a PBX or to make a long distance call.			9P15556667777
Ex. Line access number [9] (PBX)
[9] NPause or P N			KClear PauseL
	Phone number
			OR

• Pressing Pause or P once creates a 3.5 second pause. This prevents misdialing when you dial after confirming the entered number (p. 26) or dial a stored number (p. 40, 41).

•Pressing Pause or P more than once increases the length of the pause between numbers.

FLASH Button Handset Base Unit

Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting.

•Pressing [FLASH/CALL WAIT] cancels Temporary Tone Dialing mode or the mute (p. 48).

Selecting the flash time Handset

The flash time required depends on your telephone exchange or host PBX. You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)”. The factory preset is “700 ms”.

•If PBX functions do not work correctly, consult your PBX supplier for the correct settings.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.
		KBack dB SelectL
3	Scroll to “Set tel line” by pressing [d] or
		Set tel line
	[B], then press Select.
		KBack dB SelectL
4	Scroll to “Set flash time” by pressing [d]
		Set flash time
	or [B], then press Select.
		KBack dB SelectL
5	Select the desired time by pressing [d] or [B].
		Set flash time
		:700ms
		KBack dB SaveL

6Press Save, then press [OFF].

Telephone System

For assistance, please call: 1-800-211-PANA(7262)

49