Panasonic KX-TG2382B 1, 3, 6, 4 5

63

Useful Information

For assistance, please call: 1-800-211-PANA(7262)

Re-registering the Handset

If you want to re-register the handset to the base unit or a different base unit of

the same model, you need to register it to that base unit. The handset will be

given a new extension number of that base unit. Only one handset can be

registered at a time. Make sure the base unit and the other handsets are not

being used. Registration must be completed within 1 minute.

1Handset: Press (MUTE/FUNCTION).

2Scroll to “Initial set” by pressing Öor

Ñ, and press á.

3Scroll to “HS register” by pressing Öor

Ñ, and press á.

4Press áat “Registration”.

5Base unit:

Press and hold

HANDSET LOCATOR/INTERCOM (ALL)

until the CHARGE indicator ﬂashes.

6Handset:

#Press á.

$Wait until a long beep sounds and the

display shows the registered number.

The registration will be then complete.

•The registered number “[1]

”

to “[3]” is shown on

the top right of the display.

•You can stop registration by pressing (OFF)on the handset and pressing

HANDSET LOCATOR/INTERCOM (ALL) on the base unit.

If you have canceled the handset registration at the previous base unit

(p. 62), start from step 5.

If you have not canceled the handset registration at the previous base unit

(p. 62), the handset number still remains on that base unit memory. Erase the

handset number from the previous base unit. For KX-TG2382B/KX-TG2382PW/

KX-TG2383S base unit:

(1) Press and hold HANDSET LOCATOR/INTERCOM

(ALL) until the CHARGEindicator ﬂashes. (2) Press and hold HANDSET

LOCATOR/INTERCOM ((1) to (3)) of the handset number that you want to erase

until the CHARGEindicator ﬂashes, then rapidly ﬂashes, then goes out

.

Date and time

H

Initial set

--------------

Set answering

H

HS register

--------------

--------------

H

Registration

Deregistration

Press [ALL] on

base for 3 sec,

then press [

H

].

Handset

Registering

Handset [3]

Registered

Ex. Extension number 3

Contents

Main Operating Instructions Page For KX-TG2382B/KX-TG2382PW users For KX-TG2383S users Contents Preparation Cordless Telephone Answering System Useful Information For Best Performance Battery charge Base unit location/Noise Location of Controls Location of Controls Installation Connections Installation Installing the Battery in the Handset Battery Charge Recharge Battery information Battery strength Belt Clip H Optional Headset Programmable Settings How to select a function item from the menu Programming Guidelines Useful information: Function Menu Table You can use the following functions to customize your unit. After pressing Date and Time 2 4 6 5 7 3 4 5 6 For Caller ID service users 3 4 5 6 7 8 Auto Talk Feature 4 6 Ringer Volume 2 3 4 LCD Contrast 3 4 Preparing the Answering System Greeting Message 1 2 4 3 To record a greeting message Preparing the Answering System To check the recorded greeting message To erase the recorded greeting message Pre-recorded greeting message Flash Memory Message Backup 4 6 Preparing the Answering System Number of Rings 4 5 6 *Toll saver 2 3 System Capabilities Using the Handset Making Calls 2 3 4 To dial after conrming the entered number 1 2 3 To redial the last number dialed on the handset To redial using the redial list (Memory Redial) Making Calls To adjust the receiver volume (HIGH, MEDIUM or LOW) or speaker volume (6 levels) while talking Backlit LCD display Lighted handset keypad To put a call on hold 2 Auto Talk Caller ID Service How caller information is displayed when a call is received ROBINSON,TINA 3 Using the Caller List Viewing the Caller List What means 2 If a caller calls more than once Calling Back from the Caller List 3 2 4 5 6 Editing the Callers Phone Number The Caller ID Number Auto Edit Feature Storing Caller List Information in the Directory 2 3 2 To erase all entries in the Caller List 2 Erasing Caller List Information To erase a specic caller from the Caller List Directory Storing Names and Numbers 3 4 5 6 T Tom Jones Tom Tom Jo To Selecting characters to enter names 2 3 Editing 2 3 4 5 6 7 2 4 Intercom Making Intercom Calls 1 2 3 1 4 2 3 Answering Intercom Calls Transferring a Call To transfer a call from the handset 1 2 3 4 Call Share 1 2 3 Muting Your Conversation For Call Waiting Service Users Special Features Temporary Tone Dialing (For Rotary or Pulse Service Users) FLASH Button 1 Selecting the ash time 3 2 4 1 2 4 3 Ringer Tone Automatic Answering Operation Setting the Unit to Answer Calls Monitoring incoming calls Listening to Messages To play back messages During playback Erasing Messages Erasing a specic message 1 2 Voice menu Remote Operation with the Handset 2 To listen to messages 3 Direct commands (4) (5) (1) (2) (9) (*)(4) (*)(5) (0) (8) Remote Operation from a Touch Tone Phone Summary of remote operation Remote Code 2 4 6 To check the remote code Remote Operation from a Touch Tone Phone Voice Menu Direct Remote Operation Direct commands (4) (5) (1) (2) (9) (*)(4) (*)(5) (0) Turning on the Answering System 2 1 3 4 5 Adding Another Phone Wall Mounting Wall Template Battery Replacement 1 2 4 3 Canceling Registration/Re-registration 3 Canceling the Handset Registration 6 4 7 1 3 6 4 5 Display message If the Following Appear... Display message Cause & Remedy Troubleshooting Page Troubleshooting General Page Important Safety Instructions SAVE THESE INSTRUCTIONS FCC and Other Information CAUTION: WARNING: Important Safety Instructions Page FCC and Other Information Index Index Specications Panasonic Telephone Products Limited Warranty Customer Services Directory