Programming
Feature | Feature | Setting code | System |
| code |
| setting |
Set flash time*6 | {0}{5}{2} | {1}: <700ms> {2}: 600ms | r |
|
| {3}: 400ms {4}: 300ms |
|
|
| {5}: 250ms {6}: 110ms |
|
|
| {7}: 100ms {8}: 90ms |
|
Set line mode*7 | {0}{5}{3} | {1}: A {2}: <B> | r |
Store VM access# | {0}{7}{1} | Go to step 2 on page 32. | r |
V.M. access | {3} | Go to step 2 on page 33. | – |
VM tone detect | {0}{7}{2} | {1}: <On> {0}: Off | r |
Voice enhancer | {5} | {1}: On {0}: <Off> | – |
*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*2
*3 This tone lets you know when you receive a call while you are on an intercom call. If you select “On”, the tone sounds repeatedly for as long as the line rings. If you select “2”, the tone only sounds 2 times.
*4 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones.
*5 If you subscribe to a distinctive ring service (such as
*6 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at “700ms” unless pressing {Flash} fails to pick up the call waiting call.
*7 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed when another phone connected to the same line is in use, you need to change the line mode to “A”.
Customer support
The handset can display the Internet address where you can download the operating instructions or get further information for this product using your computer.
{MENU} i“Customer support” i{Select} i{OFF}
For assistance, please visit http://www.panasonic.com/phonehelp | 31 |
