Programming

Feature

Feature

Setting code

System

 

code

 

setting

Set line mode*5

{0}{5}{3}

{1}: A {2}: <B>

r

Set recall time*6

{0}{5}{2}

{1}: 700ms {2}: <600ms>

r

 

 

{3}: 400ms {4}: 300ms

 

 

 

{5}: 250ms {6}: 110ms

 

 

 

{7}: 100ms {8}: 90ms

 

Voice enhancer

{5}

{1}: On {0}: <Off>

*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.

*2 KX-TG2622

*3 This tone lets you know when you receive a call while you are on an intercom call. If you select “On”, the tone sounds repeatedly for as long as the line rings. If you select “2”, the tone only sounds 2 times (KX-TG2622).

*4 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones.

*5 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed when another phone connected to the same line is in use, you need to change the line mode to “A”.

*6 The recall time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary.

The setting should stay at 600 ms unless pressing {Recall} fails to pick up the Call Waiting call.

30

Page 30
Image 30
Panasonic KX-TG2622NZ, KX-TG2621NZ operating instructions 053 2 B, 052