Useful Information
Troubleshooting
General use
Problem | Cause/solution |
The unit does not work. | L Make sure the battery is installed correctly and fully |
| charged (page 12). |
| L Check the connections (page 10). |
| L Unplug the base unit’s AC adaptor to reset the unit. |
| Reconnect the adaptor and try again. |
| L The handset has not been registered to the base unit. |
| Register the handset (page 33). |
|
|
I cannot hear a dial tone. | L Confirm the telephone line cord is properly connected |
| (page 10). |
| L Disconnect the unit from the telephone line and connect |
| a known working telephone. If the working telephone |
| operates properly, contact our service personnel to |
| have the unit repaired. If the working telephone does |
| not operate properly, contact your telephone company. |
|
|
Programmable settings |
|
Problem | Cause/solution |
While programming, the | L A call is being received. Answer the call and start again |
handset starts to ring. | after hanging up. |
|
|
Battery recharge |
|
|
|
Problem | Cause/solution |
I charged the battery fully, | L Clean the charge contacts and charge again (page 12). |
but 7continues to | L The battery may need to be replaced with a new one |
flash, or 8is | (page 12). |
displayed. |
|
The handset display is | L Confirm that the battery is properly installed. |
blank. | L Fully charge the battery (page 12). |
|
|
38
