56
If the Following Appear on Your Display...
If the unit detects a problem, one of the following messages will be displayed on the
base unit or the cordless handset. Error beeps or a busy tone will sound.
Display message Cause & Remedy
Recharge battery
(cordless handset only)
• The battery needs to be charged. Recharge the
battery (p. 12).
Charge for 15HRS
(cordless handset only)
• The battery has been discharged. The cordless
handset will not work. Charge the battery fully (p. 12).
No link to base.
Walk closer to
base and try
again.
(cordless handset only)
• The cordless handset has lost communication with
the base unit. Walk closer to the base unit, and try
again.
• Plug in the base unit’s AC adaptor.
• Raise the base unit antennas.
Busy
• The called unit is in use.
• The Privacy mode is on for the call you tried to join
(p. 41).
• The unit you tried to send directory items to is in use.
• The cordless handset you are calling is too far from
the base unit.
Invalid
The called cordless handset has not been registered
to the base unit.
•You selected your own extension number.
•You pressed [9] instead of entering an extension
number. Enter the extension number (0 to 8) to call.
Error!!
• When you tried to register or deregister the cordless
handset, the cordless handset and the base unit
could not link for some reason, such as interference
from other electrical appliances. Move the cordless
handset and the base unit away from electrical
appliances and try again.
If more than one cordless handset is in use, you may
not be able to register/deregister. Try again later.
• Another unit tried to send directory items to you but
the transfer has been stopped (p. 34, 35).
Directory Full
• When you tried to store an item in the directory, the
directory memory is full. Press [EXIT] on the base
unit or [OFF] on the cordless handset to exit the
programming mode. To erase other items from the
directory, see page 33.