Programming
*1 If “System setting” column is checked, you do not need to program the same item using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys, including confirmation tones and error tones.
*4 If you subscribe to a distinctive ring service (such as
*5 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at “700ms” unless pressing {FLASH} fails to pick up the call waiting call.
*6 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed or the IN USE indicator on the base unit does not light properly when another phone connected to the same line is in use, you need to change the line mode to “A”.
*7 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
Alarm
An alarm will sound once for 3 minutes at the set time.
Set the date and time beforehand (page 14).
1{MENU} i{8}
2{V}/{^}: “Once” i{Select}
L To turn off the alarm, select “Off”. i{Select} i{OFF}
3Set the desired date and time. i{Save}
4{V}/{^}: Select the desired ringer tone. i{Save}
L We recommend selecting a different ringer tone from outside call.
5{OFF}
Note:
LTo stop the alarm, press any dial key or place the handset on the base unit or charger.
LWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
Customer support
The handset can display the Internet address where you can download the operating instructions or get further information for this product using your computer. {MENU} i{V}/{^}: “Customer support” i{Select} i{OFF}
For assistance, please visit http://www.panasonic.com/help | 29 |
