Panasonic KX-TG6074 Setting up the base unit, Setting up the handset, Connecting the AC adaptor

Preparation

Setting up the base unit

Connecting the AC adaptor and telephone line cord

Connect the telephone line cord until it clicks into the base unit and telephone line jack (A). Connect the AC adaptor cord (B) by pressing the plug firmly (C).

LUse only the included Panasonic AC adaptor PQLV203.

If you subscribe to a DSL service Please attach a noise filter (contact your DSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

–Noise is heard during conversations.

–Caller ID features do not function properly.

To single-line telephone jack (RJ11C)

B

To single-line telephone

A jack (RJ11C)

Noise filter

Setting up the handset

C

Hook

Note:

(120 V AC, 60 Hz)

Connecting the AC adaptor

Available model: KX-TG6072/KX-TG6073/KX-TG6074

LUse only the included Panasonic AC

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor- mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LThe unit will not work during a power failure. We recommend connecting a corded telephone to the same telephone line or to the same telephone line jack using a Panasonic T-adaptor (page 5).

adaptor PQLV208.

(120 V AC, 60 Hz)

Bottom of the charger

Hooks

Hooks

Fasten the AC adaptor cord to prevent it from being disconnected.

For assistance, please visit http://www.panasonic.com/help 9