Useful Information
5Connect the telephone line cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use round cut out at the bottom of the adaptor if you are using the 4 inches phone plate), then sliding the unit down to secure it.
Connect the AC adaptor to power outlet (page 9).
LThere are two common types of wall phone plates. The distance between 1 and 2 may vary depending on the size of the wall phone plate installed.
AC adaptor cord |
83 mm
(31/4 inches)
or
102 mm (4 inches)
| (120 V AC, | |
| 60 | Hz) |
83 mm | 102 mm |
|
(3 1/4 inches) | (4 inches) |
|
To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B).
Charger
Available model: KX-TG6072/KX-TG6073/KX-TG6074
1Drive the screws (not included) into the wall.
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
2Mount the charger (A), then slide it down (B) and to the right (C) until it is secure.
A
B 
C
For assistance, please visit http://www.panasonic.com/help | 41 |
