L The numbers of all handsets registered to the base unit are displayed.
4Select the handset(s) you want to cancel, by pressing the desired handset number. i
{j/OK}
L The selected handset number(s) will flash. L To cancel a selected handset number,
press the number again. The number will stop flashing.
5“JA” i{>} i{ih}
Increasing the range of the base unit
You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on side 5. Consult your Panasonic dealer for details.
Vigtigt:
L Before registering the repeater to this base unit, you must turn the repeater mode on.
L Do not use more than one repeater at a time.
Setting the repeater mode
1{j/OK} i“Indstil base” i{>}
2“Andre valg” i{>}
3“Repeater funk.” i{>}
4“TIL” or “FRA” i{>} i{ih}
Bemærk:
L After turning repeater mode on or off, w will flash on the handset momentarily. This is normal. The handset can be used once w stops flashing.
Intercom between handsets
Intercom calls can be made between handsets. Eksempel: When handset 1 calls handset 2
1Handset 1:
{INT} iPress {2} (desired handset number).
2Handset 2:
Press {C} / {s} to answer.
3When finished talking, press {ih}.
Transferring calls between handsets
Outside calls can be transferred between 2 people.
Eksempel: When handset 1 transfers a call to handset 2
1Handset 1:
During an outside call, press {INT}. i Press {2} (desired handset number). L The outside call will be put on hold.
L If there is no answer, press {INT} to return to the outside call.
2Handset 2:
Press {C} / {s} to answer the page. L Handset 2 can talk with handset 1.
3Handset 1:
To complete the call transfer, press {ih}.
Transferring a call without speaking to the other handset user
1During an outside call, press {INT}. i Press the desired handset number.
L kflashes to indicate the outside call is on hold.
2{ih}
L The outside call rings at the other handset.
Bemærk:
L If the other handset user does not answer the call within 1 minute, the call will ring at your handset again.
21
