Panasonic KX-TG7103NE Base unit settings, Opkaldsvalg Genkald, Nr.-spærring, Andre valg Base-PIN

TG7100-7102-7103NE(e-da).book Page 16 Wednesday, April 19, 2006 1:09 PM

Base Unit Settings

Base unit settings

L Use the handset to customise the base unit.

L When customising the base unit, the current item or setting is indicated by >.

To customise the base unit:

1{j/OK}

2Press {^} or {V} to select “Indstil base”. i{>}

3Press {^} or {V} to select the desired item in the base unit settings menu. i{>}

4Press {^} or {V} to select the desired item in the sub-menu. i{>}

5Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the “Feature” column of the chart.

L To exit the operation, press {ih}.

Base unit settings	Sub-menu	Feature (default setting)
menu
Ringestyrke	—	Base unit ringer volume (Medium)
Opkaldsvalg	Genkald	Change the recall time (“100 msek.”).*1
	Nr.-spærring	side 17
Andre valg	Base-PIN	Change base unit PIN (“0000”).*2
		– Enter the current 4-digit base unit PIN.
		iEnter the new 4-digit base unit PIN.
		i{j/OK}
	Repeater funk.	(“FRA”): side 21

*1 Change the recall time, if necessary, depending on the requirements of your service provider/telephone company or PBX.

*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.

16