Programming
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the base unit.
Important:
L See page 4 for information on the available model.
Registering a handset to the base unit
The supplied handset and base unit are
1Handset:
{MENU} i{#}{1}{3}{0}
2Base unit:
Press and hold {LOCATOR} for about 5 seconds until the indicators for VOICE MAIL turn on. (No registration tone)
L If all registered handsets start ringing, press the same button to stop. Then repeat this step.
L The next step must be completed within 90 seconds.
3Handset:
Press {OK}, then wait until a long beep sounds.
Note:
L When you purchase an additional handset, refer to the additional handset’s installation manual for registration.
Deregistering a handset
A handset can cancel its own registration (or the registration of
another handset) that is stored to the base unit. This allows the handset to end its wireless connection with the system.
1{MENU} i{#}{1}{3}{1}
2{3}{3}{5} i{OK}
3Select the handset(s) you want to cancel by pressing the desired handset number.
L The selected handset number(s) flashes.
L To cancel a selected handset number, press the number again. The number stops flashing.
4{OK} i{V}/{^}: “Yes” i
{SELECT}
L When you cancel a different handset than the one you are now using, press {OFF} to exit.
For assistance, please visit http://www.panasonic.com/help | 29 |
