Useful Information

Problem

Cause/solution

I cannot register a handset

L The maximum number of handsets (6) is already

to a base unit.

registered to the base unit. Cancel unused

 

handset registrations from the base unit (page 29).

 

 

Battery recharge

 

 

 

Problem

Cause/solution

The handset beeps and/or L Battery charge is low. Fully charge the batteries

3flashes.

(page 10).

I fully charged the

L Clean the battery ends (S, T) and the charge

batteries, but

contacts with a dry cloth and charge again.

3still flashes or L It is time to replace the batteries (page 10).

the operating time seems to be shorter.

Making/answering calls, intercom

Problem

Cause/solution

w is flashing.

L The handset is too far from the base unit. Move

 

closer.

 

L The base unit’s AC adaptor is not properly

 

connected. Reconnect AC adaptor to the base

 

unit.

 

L The handset is not registered to the base unit.

 

Register it (page 29).

Noise is heard, sound cuts

L You are using the handset or base unit in an area

in and out.

with high electrical interference. Re-position the

 

base unit and use the handset away from sources

 

of interference.

 

L Move closer to the base unit.

 

L If you use a DSL/ADSL service, we recommend

 

connecting a DSL/ADSL filter between the base

 

unit and the telephone line jack. Contact your

 

DSL/ADSL provider for details.

The handset does not ring.

L The ringer volume is turned off. Adjust the ringer

 

volume (page 25).

 

L Night mode is turned on. Turn it off (page 28).

I cannot make a call.

L The dialing mode may be set incorrectly. Change

 

the setting (page 13).

 

L The handset is too far from the base unit. Move

 

closer and try again.

I cannot make long

L Make sure that you have long distance service.

distance calls.

 

 

 

42For assistance, please visit http://www.panasonic.com/help

Page 42
Image 42
Panasonic KX-TG9321 Battery recharge Problem Cause/solution, Making/answering calls, intercom Problem Cause/solution