Panasonic KX-TG9361 Connections, Charger, Base unit, Preparation, During a power failure, Hook

Preparation

Connections

Connect the AC adaptor cord (A) by pressing the plug firmly (B). Connect the telephone line cord until it clicks into the base unit and telephone line jack (C).

Base unit

L Use only the supplied Panasonic AC adaptor PQLV207.

L Use only the supplied telephone line cord. Using another telephone line cord may not allow the unit to work properly.

To single-line C telephone jack A (RJ11C)

Note:

L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

L The AC adaptor should be connected to a vertically oriented or floor- mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

During a power failure

The unit will not work during a power failure. We recommend connecting a corded-type telephone (without AC adaptor) to the same telephone line or to the same telephone line jack using a Panasonic T-adaptor (page 6). Emergency power can be supplied to the unit by connecting a Panasonic battery back-up power supply noted on page 6.

If you subscribe to a DSL/ADSL service

(120 V AC,

60 Hz)

B

Hook

Please attach a DSL/ADSL filter (contact your DSL/ADSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:

– noise is heard during conversations.

– Caller ID features do not function

Charger

Available for:

KX-TG9372

L Use only the supplied Panasonic AC adaptor PQLV209.

	B
A	Hooks
	(120 V AC, 60 Hz)

properly.

To single-line telephone jack (RJ11C)

DSL/ADSL filter

12For assistance, please visit http://www.panasonic.com/help