12 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Preparation
Symbols used in these operating instructionsRegistering the cordless camera
Register the cordless camera to a KX-
TG9120/KX-TG9140/KX-TG9150 base unit.
1Base unit:
Press and hold {x} on the base unit for
about 3 seconds, until the registration
tone sounds.
2Camera:
Press PROG. (program) on the back side
of the cordless camera with a pointed
object such as a pen until a beep sounds.
LWhen registration is completed
successfully, the cordless camera
beeps and the indicator stops flashing
red but remains lit in yellow-green
(page 8).
LIf all registered handsets start ringing in
step 2, press {x} to stop. Start again
from step 1.

Cancelling the cordless camera

Using a handset registered to the same
base unit, you can cancel the registration of
a registered cordless camera.
1J (centre of joystick) i L i L
2Enter “335”.
3“Cancel Handset” i L
4Select the cordless camera you want to
cancel. i t
LA Q is displayed with the selected item.
LTo cancel a selected item, select it
again. i t
5L i “Yes” i L
L “Please Wait...” will be displayed
and a long beep will sound.
6{ih}
Symbol Meaning
JPress J (centre of joystick).
iProceed to the next operation.
LPress L (centre of joystick).
“ ” Select the words in quotations
shown on the display (e.g.,
“Cancel Handset”) by
pushing the joystick up or
down.
TGA914E(e).book Page 12 Friday, July 28, 2006 12:09 PM