TGA914E(e).book Page 13 Friday, July 28, 2006 12:09 PM
Camera Monitoring
Camera monitoring using a handset
With a handset, you can monitor the image and sound of the room where the cordless camera is located. The monitored camera does not ring, allowing you to easily monitor a baby’s room, for example, from different areas of the house.
Important:
LBefore you start monitoring, confirm that the camera lens of the cordless camera has been adjusted to the correct angle.
LOnly 1 person can access the cordless camera at a time.
LA refreshed image taken by the cordless camera is displayed every few seconds. The displayed image is not a moving picture.
LWhile monitoring a cordless camera, other users cannot make an intercom call or transfer a call.
LThe monitoring connection is automatically cancelled after 10 minutes.
LWhile monitoring you cannot place the handset on the base unit or charger. The monitoring connection will be cancelled.
LThe cordless camera may not page handsets in the following conditions:
–when other users are on an intercom or conference call.
–when electrical interference is emitted from electrical devices.
–while you are on a call with the handset. (In this case you will hear 2 tones and z will flash on the handset.)
LYou cannot make a monitoring connection via a DECT repeater.
Monitoring the cordless camera from a handset
Handset
1
2 Select the desired cordless camera. i P/{C}/{s}
3 Speak to the cordless camera user if necessary.
OR
To mute your sound output, press {C/T} if necessary.
4 When you finish monitoring, press {ih} or place the handset on the base unit or charger.
Adjusting receiver/speaker volume Push the joystick up or down while monitoring.
Talking to the paged party using the cordless camera
When the cordless camera is paged from a handset, the cordless camera does not ring and the speakerphone is turned on. You can talk to the handset user. Speak clearly into the MIC.
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 | 13 |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
