Panasonic KX-TGA914E Setting up the cordless camera

Preparation

Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 9

Setting up the cordless camera

Connect the AC adaptor cord by pressing the plug firmly (A). Connect the call button cord

until it clicks into the unit (B).

LUse only the included AC adaptor.

Note:

LWhen the AC adaptor is connected, the indicator lights in red then starts flashing.

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel

warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do

not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor

may cause it to become disconnected.

(220–240 V, 50 Hz)

Hooks

TGA914E(e).book Page 9 Friday, July 28, 2006 12:09 PM

Contents

Main Operating Instructions Page Introduction Thank you for purchasing the cordless camera. Page Accessory information Included accessories 6 Important information Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) Page 8 Controls Understanding the cordless camera indicator Setting up the cordless camera Connecting the AC adaptor and the call button 10 Adjusting the cordless camera lens angle Setting the DIP switches 1 ON 23 DIP switches (Default position: ON) OFF*1 12 Symbols used in these operating instructions Registering the cordless camera 6 1 2 Camera monitoring using a handset Monitoring the cordless camera from a handset 1 2 3 4 1 2 3 4 1 2 3 4 Useful settings while camera monitoring 2 2 3 4 Wall mounting Connecting the wall-mounting adaptor Mounting the cordless camera on the wall 1 2 1 2 Removing the wall-mounting adaptor Troubleshooting Page Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 21 Conditions of guarantee Specifications Page Sales and support information PQQX15520ZA