Making/Answering Calls

Making an intercom call

Handset

1MMENUN a MbN: Intercoma

MSELECTN

2MbN: Select the desired unit. a MSELECTN

3 When you finish talking, press MOFFN.

Note:

RYou can also use the MINTN soft key, if displayed, to make intercom calls.

Base unit*1

*1 KX-TGE240 series: page 3

1Press MINTERCOMN.

When 2 or more handsets are registered:

To page a specific handset, enter the handset number.

To page all handsets, press 0 or wait for a few seconds.

RTo stop paging, press MINTERCOMN.

2When you finish talking, press

MINTERCOMN.

Answering an intercom call

Handset

1Press MN to answer the page.

2When you finish talking, press MOFFN.

Base unit*1

*1 KX-TGE240 series: page 3

1Press MINTERCOMN to answer the page.

2When you finish talking, press

MINTERCOMN.

Using the Smart function key

Press M N to answer the page.

Power back-up operation

When a power failure occurs, the charged handset temporarily supplies power to the

base unit (power back-up mode). This allows you to make and receive calls using a handset during a power failure. The base unit will not perform any other functions. However, some functions such as Caller ID and phonebook are available only when using a handset other than the handset supplying power to the base unit. You can program Power failureand the default setting is Auto(page 31).

Important:

RIf a handset is not placed on the base unit when a power failure occurs, Base no power Press OFFis displayed. After pressing MOFFN on the handset, place it on the base unit to start power back-up mode.

RPower back-up mode will not work if the battery level of the power supplying handset is or .

RDo not lift the power supplying handset from the base unit during power back-up mode.

Panasonic Ni-MH battery performance (supplied batteries) during power back-up mode

When the batteries are fully charged, operating time of the handset in power back-up mode varies depending on usage.

Continuous use of the handset in power back-up mode: 1.5 hours max.

Continuous use of the handset other than a handset in power back-up mode: 2 hours max.

Not in use in power back-up mode: 2 hours max.

Making calls during a power failure

nWhen only 1 handset is registered:

1 Lift the handset and dial the phone number.

2Within 1 minute, place the handset on the base unit.

R Wait until speakerphone is turned

on automatically and the call is made.

22For assistance, please visit http://www.panasonic.com/help

Page 22
Image 22
Panasonic KX-TGE232, KX-TGE245, KX-TGE244 Power back-up operation, Making an intercom call, Answering an intercom call