Programming
*2 If you program these settings using one of the units, you do not need to program the same item using another unit.
*3 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
*4
*5 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 14).
*6 If you subscribe to a distinctive ring service (such as
*7 The preset melodies in this product are used with permission of © 2009 Copyrights Vision Inc.
*8 This setting is available when you have the key detector
*9 For models with supplied key detectors, the display shows “1: Detector1”.
*10 If you register 2 or more key detectors.
*11 If you have 2 or more key detectors.
*12 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*13 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700 ms” unless pressing MFLASHN fails to pick up the waiting call.
*14 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to “A” if telephone line condition is not good.
Alarm
An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time.
Important:
RMake sure the unit’s date and time setting is correct (page 14).
1MMENUN#720
2Select an alarm by pressing 1 to 3. a
MSELECTN
3MbN: Select the desired alarm option. a
MSELECTN
“Off”
Turns alarm off. Go to step 10.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time. Go to step 5.
“Weekly”
Alarm sounds weekly at the set time(s).
4Proceed with the operation according to your selection in step 3.
n Once:
Enter the desired month and date. a
MOKN
32For assistance, please visit http://www.panasonic.com/help
