Preparation
Symbols used in these operating instructions
Symbols used for operations
Symbol | Meaning |
q, G, | The symbols to the left |
i, s, | represent the handset |
t, u, | menu icons. |
v, H, | Example: q |
x | Press the navigator key of |
| the handset up, down, left, |
| or right to select that menu |
| icon shown on the display. |
|
|
Example: | Press the navigator key up |
“Ringer | or down to select the words |
volume” | in quotations shown on the |
| display. |
i | Proceed to the next |
| operation. |
Example: | The words in the brackets |
{MENU} | show button names on the |
| handset and base unit. |
|
|
{^}, {V} | Press the navigator key up |
| or down to scroll through |
| the displayed items. |
|
|
{<}, {>} | Press the navigator key left |
| or right to select the |
| desired items. |
Registering the handset
Registering the handset
Register the handset to your base unit. The handset will be assigned an extension number by your base unit.
Important:
LBefore registering this handset or any other compatible Panasonic units to your base unit, we recommend you change your base unit’s PIN so that other Bluetooth devices in the area are not accidentally registered at the same time. For more information, see the operating instructions included with your base unit.
1 Base unit:
Press and hold {INTERCOM} until it starts flashing and a beep sounds.
LAfter {INTERCOM} starts flashing, the rest of the procedure must be completed within 2 minutes.
2 Handset:
Press {OK} (F3), then wait until the handset beeps.
LIf you have changed the base unit’s PIN, enter it and press {OK}, then wait until the handset beeps.
Note:
LIf for some reason the handset is not registered to a base unit, use the following procedure to register it to the base unit.
{MENU} (F2) ixi{SELECT}
i“Registration” i{SELECT}
i“Registration” i{SELECT}
iRepeat step 1. i{OK}
If you have already canceled the unit’s registration at the previous base unit, follow steps 1 and 2.
18For assistance, please visit http://www.panasonic.com/phonehelp
