Panasonic KX-THA12, KX-THA17 Setting telephone line, Set tel line iSELECT 3 Line select iSELECT

Programmable Settings

Setting telephone line

Line selection

The line selection mode determines which line is selected when you press {C}.

–“Auto”: When making a call, line 1 is selected. If that line is unavailable, line 2 is selected. When answering a call, the ringing line is selected.

–“Line1”: Line 1 is selected.

–“Line2”: Line 2 is selected.

1 {MENU} (F2) ixi{SELECT}

2 “Set tel line” i{SELECT} 3 “Line select” i{SELECT}

4 Select the desired setting. (Default:

“Auto”) i{SAVE} i{OFF}

Note:

LYou can select a line manually regardless of the line selection mode by pressing {LINE1} or {LINE2}.

Dialing mode

If you cannot make calls, change this setting depending on your telephone line service.

“Tone”: For tone dial service.

“Pulse”: For rotary pulse dial service. LYou only need to program this setting

once, using either the handset or base unit.

1 {MENU} (F2) ixi{SELECT}

2 “Set tel line” i{SELECT} 3 “Set dial mode” i{SELECT}

4 Select the desired setting. (Default:

“Tone”) i{SAVE} i{OFF}

Flash time

The flash time depends on your telephone exchange or host PBX.

LYou only need to program this setting once, using either the handset or base unit.

Important:

LThe setting should stay at 700 ms unless pressing {FLASH} fails to pick up the Call Waiting call.

1 {MENU} (F2) ixi{SELECT}

2 “Set tel line” i{SELECT}

3 “Set flash time” i{SELECT}

4 Select the desired line.

5 Select the desired setting. (Default: “700ms”) i{SAVE} i{OFF}

Note:

LIf the base unit is connected via a PBX, certain PBX functions (call transferring, etc.) may not work correctly. Consult your PBX supplier for the correct setting.

Line mode

Generally, the line mode setting should not be adjusted.

When another phone connected to the same line is in use, and

–if kor lis not displayed on the handset, or

–if {LINE1} or {LINE2} is not flashing on the base unit,

you need to change the line mode to “A”. LYou only need to program this setting once, using either the handset or base

unit.

1 {MENU} (F2) ixi{SELECT}

2 “Set tel line” i{SELECT} 3 “Set line mode” i{SELECT}

4 Select the desired line.

5 Select the desired setting. (Default: “B”)

i{SAVE} i{OFF}

48For assistance, please visit http://www.panasonic.com/phonehelp