Panasonic KX-TS108W 4

For assistance, please call: 1-800-211-PANA(7262)

Advanced Operation

25

“

FLASH Button

Pressing (FLASH) allows you to use special features of your host PBX

such as transferring an extension call or accessing special telephone

services (optional) such as call waiting.

Selecting the ﬂash time

The ﬂash time depends on your telephone exchange or host PBX. You

can select the following ﬂash times: “80, 90, 100, 110, 200, 250, 300, 400,

600, 700 ms (milliseconds)”. Your phone comes from the factory set to

“600 ms”.

Make sure that a call is not put on hold.

1Press (PROGRAM).

2Press (MUTE).

3Press (2).

≥The current setting is displayed.

4Press a dialing button ((1) to (0)).

(1) : 80 ms (2) : 90 ms (3): 100 ms (4) : 110 ms

(5) : 200 ms (6): 250 ms (7): 300 ms (8) : 400 ms

(9) : 600 ms (0): 700 ms

5Press (PROGRAM).

≥A long beep sounds.

≥The unit will return to the standby mode.

≥If you are connected via a PBX, a longer ﬂash time may be necessary to use

PBX functions (transferring a call, etc.). Consult your PBX installer for the correct

setting.

Contents

Main Before Initial Use Accessories Contents Preparation Basic Operation Advanced Operation Useful Information Location of Controls Display Settings Connecting the Handset/Telephone Line Cord After connection, lift the handset to check for a dial tone. Installing the Batteries Connecting a Communication Device Programming Summary Dialing Mode 3 4 Time Adjustment 3 4 5 6 LCD Contrast 1 3 4 Ringer Volume Wall Mounting 1 2 3 Using the speakerphone 1 Making Calls 2 3 4 To redial the last number dialed Making Calls During speakerphone operation To adjust the handset volume (4 levels) or the speaker volume (8 levels) while talking To increase, press VOLUME (^). To decrease, press VOLUME (_). 1 2 3 Storing Phone Numbers 3 4 Speed Dialer To erase a stored number 3 Dialing a Stored Number 1 Storing Phone Numbers 3 To store in an UPPER memory location One-Touch Dialer To store in a LOWER memory location 3 4 To erase a stored number 2 Dialing a Stored Number One-Touch Dialer 1 2 OR From a LOWER memory location: 1 3 Memory card Special Features For Call Waiting Service Users Press (FLASH) if you hear a call-waiting tone while talking. Temporary Tone Dialing (For Rotary or Pulse Service Users) How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) Muting Your Conversation FLASH Button Selecting the ash time 4 PIN Code 3 4 6 7 To cancel the dial lock To set the dial lock 1 2 3 Dial Lock Call Restriction To set the call restriction 3 4 6 7 Optional Headset Optional Headset Making/Answering Calls 1 2 Battery Replacement 1 2 4 3 Troubleshooting Problem Remedy Page Important Safety Instructions SAVE THESE INSTRUCTIONS Page FCC and Other Information Page Index